camera service
"
El gastroscopio FUJINON EG-530N para su reparación
FUJINON EG-530N gastroscope for repair ► Brief Description Fault: 1.Biopsy tube broken; 2.Angle is not enough; 3.Camera over-heating, there are occasional snowflakes on the image and big risk for CCD; 4.Insert tube aging and wrinkle; 5.Light guide tube aging and wrinkle； 6.Stress boot of light guide tube broken; 7.Light bundle broken; 8.EVE tube aging and wrinkle. Solution: 1: Replace CCD; insert tube; light bundle; biopsy tube; bending mesh; wires; bending section; rubber;
Socket for STORZ IMAGE1 S™ X-LINK Module TC301
Socket for STORZ IMAGE1 S™ X-LINK Module TC301 ► Brief Description The STORZ TC301, also known as the IMAGE1 S™ X-LINK, is a link module, which means it doesn't have a wide range of external "sockets" or ports like a full camera control unit (CCU). Its primary function is to act as a bridge for specific devices to connect to the main IMAGE1 S™ system. ► Features It serves as a link module, bridging the connection between the main camera system (like the IMAGE1 S™ CONNECT) and
Socket for STORZ TC300/22220010/22220020 processor
Socket for STORZ TC300/22220010/22220020 processor ► Brief Description Camera Head Port (LINK Output): This is the most important socket on the device. It's the multi-pin, proprietary port designed specifically to connect to the IMAGE1 S™ H3 camera heads. This single connection transmits power to the camera head and receives the high-definition video signal, as well as control and communication data, back from it. ► Features System Connection Port (Input): This socket links
Nuevo cable para el endoscopio de vídeo 3D KARL STORZ TIPCAM 1S
Brand New Cable For KARL STORZ TIPCAM 1S 3D Video Endoscope ► Brief Description The TIPCAM 1 S 3D is a video endoscope, meaning the image sensors are located at the endoscope's tip. The "cable" connecting the image sensors to the camera control unit (CCU) is typically integrated into the main body of the endoscope handle and connects via a proprietary connector to the IMAGE1 S™ CCU. ► Features Image Data Transmission: Transmits the digital video signal captured by the two
Socket for STORZ IMAGE1 S™ D3-LINK Module TC302
Socket for STORZ IMAGE1 S™ D3-LINK Module TC302 ► Brief Description The TC302 is the interface that enables 3D endoscopy. It takes the video signal from a specialized 3D endoscope and processes it, preparing it for display on a 3D monitor. This provides the surgeon with a crucial sense of depth and perspective during minimally invasive procedures. ► Features 3D Compatibility: The TC302 is specifically designed to handle stereoscopic video signals, which means it processes two
Cable de luz de fibra óptica para fuente de guía de luz Stryker
Fiber Optic Light Cable for Stryker Light Guide Source ► Brief Description The Stryker Fiber Optic Light Cable is a critical accessory in endoscopic surgery. Its primary function is to deliver a high-intensity, cold light source to the surgical field, ensuring clear and bright visualization. ► Features Light Transmission: This is the cable's most fundamental role. Composed of thousands of high-purity optical fibers, it efficiently transmits intense light from a light source
Cable de luz de fibra óptica para STORZ Fuente de guía de luz
Fiber Optic Light Cable for STORZ Light Guide Source ► Brief Description The KARL STORZ Fiber Optic Light Cable is an essential accessory in endoscopic setups, functioning to transfer high-intensity light from the light source (often Xenon or LED) to the light post of the endoscope. ► Features Illumination: Transfers "cold light" (light that has had the infrared/heat portion filtered out at the source) to the surgical field, preventing burns and thermal damage. System
Olympus MAJ-1121 Transductor de Mano
Olympus MAJ-1121 Transducer Handpiece ► Brief Description The MAJ-1121 is a dedicated Remote Signal Cable designed for medical endoscopy systems. It serves as the communication bridge between the Olympus Video Processor and peripheral imaging devices. ► Features Signal Transmission: It relays trigger signals from the remote switches (buttons) located on the endoscope handle to external equipment.Workflow Integration: Enables the endoscopist to control capturing, printing, or
Lámpara de xenón Olympus MAJ-1817 para fuente de luz fría endoscópica
Olympus MAJ-1817 Xenon Lamp For Endoscopic Cold Light Source ► Brief Description The OLYMPUS MAJ-1817 is a high-performance xenon lamp designed specifically for medical endoscopic systems. It serves as a critical component in providing bright, stable, and high-color-temperature illumination, essential for various medical procedures requiring high-intensity light sources. ► Features High Brightness and Color Temperature Long Lifespan and Stability Easy Replacement and
